Homeowners should consider replacing their HVAC systems when they are more than 10 years old. The cost of a new system is much less expensive than the cost of repairing an older one, not to mention the energy efficiency and savings that come with it. This article will provide you with information on how to know if your Denver HVAC is in need of being replaced, as well as steps for getting a new system installed!
Investigate your current HVAC system to see if it is working properly
A homeowner should first investigate their current HVAC system to see if it is working properly. This means running the air conditioner during a time when they are not home and noticing whether or not cool air begins flowing from the vents in your house after 15-20 minutes. If you notice that there is no cool airflow coming through, this may indicate an issue with your cooling coil. It would be best to call for professional help at this point!
Check the air filter and replace as necessary
Checking the air filter and replacing as necessary is another way to see if your HVAC needs replaced. If you have a dirty filter, it could be working too hard and not allowing enough air through for the system to cool properly. Check the filters at least once every two months or so.
A homeowner should first investigate their current HVAC system to see if it is working properly by running the air conditioner during a time when they are not home and noticing whether or not cool airflow begins flowing from vents in house after 15-20 minutes; checking the air filter and replacing as necessary is another way than can help notice an issue with cooling coil that would need professional attention!
If there’s no Cool Air flow coming out of these vents inside your home, then the system might need to be replaced.
It’s important to keep your home cool during hot summer months so that you can enjoy it more! If you’re not feeling any air flow or notice your HVAC needs replaced, try these easy tips before calling for an expensive professional service call. First check whether or not there is airflow circulating in vents by running the AC when you are away from house and noticing if there is cooled airflow coming out of vents 15-20 minutes later; this will make sure that our A/C unit isn’t working
Inspect ducts for leaks or blockages
Inspecting your ducts for leaks or blockages can be difficult, but there are a few things you should check for.
Is your ducts clean? If not, then it’s possible that the air isn’t able to circulate properly because of mold and debris in between coils inside the metal pipe. This will cause one side to have more cold airflow than another. Is your insulation installed correctly? Insulation is important so try checking if all gaps around pipes has been sealed off with proper materials such as fiberglass and foam insulation so no outside cool air from getting in (causing too much heating).
Anything new like a furnace replacement or an addition on your house could create extra pressure on system
Clean out any debris from the unit’s fan blades
If there is any debris on the fan blades, it could cause a lot of problems. Have someone take off the outer cover and clean out any debris that might be there to keep your system running at top speeds.
Clean out any debris from the unit’s fan blades If there is any debris on the fan blade, it can cause many issues to arise which will lead you towards needing a new HVAC systems. You should have somebody remove the outside cover and then completely clean out anything that may be in or around this area so your system can work as expected for years!
The professional cleaner needs to know how important having an air ducts cleaned is, with not only maintaining but also improving their service because they are more knowledgeable about what they’re doing.
Have a professional inspect your HVAC system
Getting a professional HVAC inspection performed annually will help to ensure that your system is running smoothly and efficiently. The inspector should be able to detect any problems so they can be fixed before the HVAC systems need a new one installed, or if something catastrophic happens like an earthquake for example!
You may want to invest in an annual service agreement contract because it’s affordable up front but then you are saving money on each individual checkup as opposed to paying full price with every single visit. You’ll also receive priority scheduling which means not waiting around day after day just trying to get somebody out there who may have missed their appointment window since they were already booked earlier than you. This is where having this type of contact comes in very handy, and by getting
Clean your furnace filters monthly, which will also help with energy efficiency
Your furnace filters help to keep debris out of your home’s heating system, and ensure that the air coming into your house is clean. The filters also help with energy efficiency by keeping dust, dirt, pet dander and other allergens from getting inside as well. What this means is that you’ll spend less on utilities because it takes fewer resources to heat up a room in which almost all particles have been removed thanks to those filter systems!
You should be changing them at least monthly or every three months if you’re using an electrostatic type like some models come installed with. Make sure they stay dry though so don’t just toss ’em when they get wet. Instead take care of them before setting off their bacteria-growing ability by letting moisture linger for too long.
There might be a problem with your air conditioning system if the air feels stagnant inside your property. From insulation issues to problems with the components, domestic cooling problems have numerous causes, and most are simple to repair. Here are some top tips for rectifying air conditioning problems without purchasing a new system.
Examine the Ductwork to see Whether it is Leaking
As time passes, ducts can start leaking, allowing cool air to travel through the floor and wall spaces. Such leaks frequently go undetected, but they can be discovered using a smoke pencil. Duct leak repair is a standard HVAC service. Thankfully, this service is quite cheap and can enhance your property’s air quality substantially.
Inspect Your Home for Insulation Issues
Occasionally, shoddy insulation can cause cooling issues. This is particularly common in properties that have not had their windows or doors upgraded. The value of some properties is linked to their historical integrity. If this describes your home, it might be wise to improve its insulation with weather stripping. This can be applied to closure points of the doors and windows to retain warmth indoors. Although this is not directly related to air conditioning, correct insulation methods can greatly impact cooling capacity.
Use Central air Conditioning Instead of Window Units.
It costs a fair amount of money to swap window units for a central air conditioning unit. However, this is a worthwhile investment. As well as cooling a property more extensively, central air conditioning can reduce your utility bills. A modern central air conditioning unit is legally required to have a SEER (seasonal energy efficiency ratio) of thirteen or more. On the other hand, window units are not regulated in this manner and frequently have ten or less efficiency ratings. If duct installation would compromise your property’s interior, installing one or several split ductless units might be the solution.
Carry out Regular Filter Changes
As filters remove dust from the air, they gradually become blocked with debris. Sometimes, they become so blocked that they obstruct the airflow and cause properties to warm up. You can change a filter yourself by reading the manual provided by the manufacturer.
Get the Thermostat Inspected
A malfunctioning thermostat can cause cooling issues, and this is easy for an HVAC engineer to fix. If the thermostat has to be replaced, this will not cost you much compared to other components.
Check the Refrigerant Inside Your Air Conditioning Unit
If it has insufficient refrigerant, your air conditioning system will not keep your property cool enough. Also, if this problem is due to leaking – as it normally is – the issue will get worse. It is more costly to replace a refrigerant reservoir than filling it up again when it becomes depleted. However, the total cost of refilling will quickly surpass the cost of replacement.
The above information will help you identify the cause of indoor cooling issues. However, it is no substitute for professional air conditioning advice. If your property is not cooling properly or wants an upgraded cooling solution, get in touch with an HVAC technician and arrange an appointment.